single-person cryogenic chamber

JUKA SINGLE

A single-person cryogenic chamber, designated to perform the whole body cryotherapy treatments. Juka cryosauna, as one of only a few devices in the world, holds the medical certificate, which serves as a warranty of the highest quality, safety and reliability level. Our device is a perfect solution for hospitals, welness and spa centers, rehabilitation centers, clinics, fitness clubs as well as for individual recipients.

Advantages

  • 20 years of experience in the construction of cryogenic chambers and cryosunas
  • Medical certificate TUV Rheinland , ISO 13485
  • Nitrogenpressu reapprox. 4 bar – which increases the safety of the procedure. Nitrogen injection occurs to the generator, located outside the cabin, and thus outside the place where the patient is staying, which increases the safety for the patient.
  • Automatic pumping of nitrogen from the cryosauna  cabin at the end of the procedure, which means that the patient at the end of the procedure is not immersed in the nitrogen vapors.
  • Safety for the patient – a system of forced circulation of nitrogen through the generator and nozzles spraying nitrogen into the cabin – There is no poss ibility of liquid nitrogen in the cryosauna cabin – therefore , there is no possibility of frostbite from liquid nitrogen
  • Cabin ventilation, removing excess nitrogen from the cabin to the outside.
  • Lift, allowing you to adjust the patient’s height so that his head is above the top edge of the cryo sauna
  • Additional ventilation of the general room where the cryosauna is installed.
  • Doors closed magnetically – favor the safety of the patient – they can be opened at any time during the procedure

  • Medical certificate

    TU Rheinland ISO 13485

  • Safety

    Safety for the patient – forced circulation and nozzles spraying nitrogen into the cabin

  • Oxygen sensor

    Real time monitoring of oxygen content over the head of the patient

  • Ventilation

    Cabin ventilation removing excess nitrogen from the cabin outside

Technical Specification

EXTERNAL DIMENTIONS
Width /with cabin doors closed/900 mm
Width /with cabin doors open/ 1550 mm
Length1600 mm
Height complete / with illuminated ceiling/2450 mm
Height complete / without illuminated ceiling -option/2250 mm
Height of cabin1850 mm
Weight of unit /cabin + one person/345 + 80 kg
Height of treatment participant 150 – 200 cm
ELECTRICAL PARAMETERS
Nominal electrical power usage1.5 KW
Power supply 230 V /50 HZ
TECHNICAL PARAMETERS
Temperature range in the cabin during sessions /regulated/from -120 °C to -160 °C
Cabin freezing time /start/ 4 – 8 min.
Time of one session / regulated by an operator/1 – 3 min.
Nominal time of one session / prescribed/ 1.5 min.
Maximum time of one session3 min.
Maximum time period between successive sessions 2 min.
Automatic drying time of cabin90 sec.
NOMINAL USE OF NITROGEN *
Freezing cabin / precooling consumption8 – 10 kg
Consumption during session1.0 – 1.5 kg/min.
Per nominal session duration /1.5 min/ 1.5 – 2.5 kg/min.
Per 10-person group during sessions of 1.5 min/person including precooling the cabin
35 kg
Per 30-person group during sessions of 1.5 min/person
including precooling CRYOSAUNA cabin 		80 kg
Oxygen sensor sensitivity range21 – 18 %
* Not including connection installation with cryogenic liquid nitrogen container
Download PDF product brochure
Request to be contacted